The original daewootech forum

Posted: **Fri Feb 20, 2004 6:01 pm**

Hey guys,

I am replacing the headgasket on my winter beater 1.6 Lemans, and I need to know the head bolt torque specs. I believe this is similar to the 2.0l engine being initial torque to certain lbs, then 3X60 degrees and finally 30 degrees. Anyone has the Lanos/Lemans manual to confirm?

Thanks!

Posted: **Sat Feb 21, 2004 8:08 am**

Tom,

I just checked my lanos manual for the 1.4, 1.5 sohc and it says:

Cyinder head bolts: (Camshaft support housing & cylinder head mounting bolts)

2 turns of 60 deg and 1 turn if 30 deg (60+60+30)

25 Nm (18 lb.ft)

hope this helps

Posted: **Sat Feb 21, 2004 2:19 pm**

thats exactly what I was looking for! Interestingly, these numbers are identical (If I recall) to the 2.0 engine.

Thanks a bunch!!!

Posted: **Mon Mar 10, 2008 11:13 am**

MMamdouh

The original daewootech forum

Whats the Head Bolts torque for my Woo?

Whats the Head Bolts torque for my Woo?